Introduction
One of the daily routines for several individuals has turned out to have a cup of coffee during breakfast. And at these times, several automatic coffee makers are used. Automatic coffee machines help create an easy and convenient way for people to enjoy their favorite morning beverages. This convenience is accomplished using filtered water and the machine’s automatic programming to dispense coffee at reasonable periods.
In this article, we will discuss Automatic Coffee Machines and how these machines can work consistently. Also, the cleaning mechanism of the machine will be addressed to keep it safe from damage and harm.
Automatic Coffee Maker
This coffee maker is an automatically activated machine as soon as it is plugged into a power source. People can use automatic coffee machines at home or in commercial places. These are compact machines and do not need to use too much counter space, making them easier to store in cabinets or shelves. Users are no more required to push buttons and start the brewing process manually. Anyone can set the timer accordingly, and a delectable cup of coffee would be ready for them.
How to Clean an Automatic Coffee Maker
Step One: Unplug the Machine
This step may seem a little silly, but it’s imperative to remember that one should never use or touch anything on an electrical appliance while it’s plugged in. Not only could that cause sparks and shocks, but it can also overheat the machine. If there are any removable parts for cleaning, remove them before cleaning the whole coffee maker. Use warm, soapy water to rinse the hidden spaces.
Step Two: Wash the Pot Using Cold Water with Soap
If the pot is removable, it can be placed in the sink and washed with warm, soapy water. If the pot is not removable, do not try to wash it with the machine. If your pot is non-removable, use a soft sponge or cloth and warm water for this step. You could also use a bottle brush if necessary. Use a mild liquid soap such as dish soap or hand soap to avoid scratching the surface of the ceramic coffee pot.
Step Three: Wash the Carafe Using Hot Water
Instead of using dish soap for the cleaning process, try using baking soda. This method effectively removes stains from both the coffee maker and the carafe. If the pot is not removable, then baking soda may not work. Dry the entire carafe with a soft cloth (or removable, use a paper towel). Then wipe down all sides of the pot with a sponge or brush to remove any remaining stains or rub it dry with another paper towel.
Step Four: Wash the Filter Basket and Plunger
Remove the filter basket from the coffee maker and wash it in the sink. If there is a permanent filter in place, use soapy water to remove any stains inside the basket. The plunger should also be hand-washed with warm, soapy water. Make sure that it is dry before reinserting it into the carafe after cleaning!
Step Five: Clean Out the Coffee Maker
At this point, you should have a squeaky-clean pot that is ready to be used. Use a toothbrush to get into all tiny spaces where dirt may have accumulated. Use a sponge or paper towel to scrub out any remaining stains. This process is, however, not applicable if the pot is removable.
Step Six: Wipe Down the Carafe Again
There should be a clean carafe that is ready to be used again. Using warm water, gently rub the outside of the carafe with a paper towel to remove all of the remaining soap and water particles. Put your pot back into the fridge or freezer just for a few minutes to ensure that any water inside does not get on other foods. If you used baking soda in step three, remove any remaining stains from the pot by gently rubbing it with a dry paper towel.
Step Seven: Clean the Coffee Maker’s Thermometer
Clean the thermometer with warm water and dish soap to give it a good scrubbing. Rinse it with clean water and dry with a soft cloth or paper towel.
Step Eight: Dry the Coffee Maker
Place the pot on a drying rack or towel and ensure that it is completely dry before using it again. The coffee maker should be kept in a cool, dry place for storage when not in use.
Conclusion
Cleaning an automatic coffee maker is not a complex process. However, it’s important to remember the steps that can be used for effective cleaning and ensure the machine’s safety. These steps guarantee that there is no dirt left in its system. Any dirt that was left behind will start accumulating in the machine once more. Thus, this will lead to damages in the long run.
Hope the article was helpful and provided adequate information about the cleaning process. Good Day!
FAQ’s
Q. What should you use to clean your coffee maker and pot?
A. To keep your machine clean and in tip-top shape, use warm soapy water to remove any mineral deposits, residue or build-up. For the carafe, use a baking soda paste and then wipe it down with warm soapy water. You could also use a bottle brush for the inside of the carafe.
Q. Why do some coffee makers drip after I clean them?
A. If your machine has a permanent filter in place, remove it and wash it with warm soapy water. Also, scrub any hard-to-reach spots as mentioned in the manual. If the pot is removable, you should use dish soap to clean it before reinserting it into the machine thoroughly. You can also use a sponge or brush for this step, as this will inhibit the drips from reoccurring.
Q. What should you do if your coffee maker stops working suddenly?
A. Check to see if the heating plate and thermostat are still in good condition. Use warm soapy water to clean or replace the thermostat. Use a combination of white vinegar and water to clean the heating plate. Let it air dry completely before using it again.